Three sides of scraping fury.
Share your thoughts
perfect scraper.. just because with that notch for the edges you you run that side of the scraper on your board its possible to dig into it..
i use this one combined with a smaller one. i use this one first to get the bulk of wax off my board then use the smaller one when it comes time to get the smaller spots that were a little heavier on wax. the corner piece is cool for cleaning up the rails
good for narrower skis
This was my first scraper and I've had a ton of luck using it on a number of skis. But it does reach it's limit when you put it on a powder ski or snowboard. It requires multiple passes to cover the width of the base and that's just not as convenient or precise as using a longer/wider scraper.
I haven't had trouble holding it, but the rectangular scrapers are much better.
Also, the notch doesn't exactly get the edges as advertised. It kind of works but that's "kind of" like "i am going to have to hit this about ten times to get the wax off the edges."
All The Scraper You'll ever need
Triangle scrapers are ideal because 3 sides means it stays sharp longer than a standard 2 sided scraper. Also rounded edges assure a good even scrape and no nasty gashes in the base. The 90 degree notch in the corner is great too, never has edge scraping been so simple. ANNNNNND This baby is SHARP out of the box, and sharp is how you want your scraper.
Gets the job done
Good scraper. You can really muscle it. Reduced my scraping time in half from the traditional rectangle.
This stays sharp for a while. It's got a small cut out to scrape out the wax off your edges. The triangle is also the strongest geometric shape, which is why I prefer this scraper to the rectangle scrapers.
Hard to hold
I don't like this scraper. I find it very hard to hold. It's just too small. I prefer the larger rectangular scrapers. With any scraper you have to make sure they have half decent edge. I can't imagine using this thing will a dull edge.
This scraper works, which is good. It scrapes the wax off well and stays sharp for a decent amount of time. I like the notch in the corner to scrape wax off my edges. This is a good scraper if you need one.
I don't know that a scraper really needs to be reviewed, but I guess in case you're curious, I have one of these and it works fine. I personally like the triangular shape, it's easier for me to hold, and fits more compact in storage. It also has the little groove on one of the sides to scrape the wax off the edge of your board.